Updated Nov 17, 2026· 7 min read

Key takeaways

  • Hanging shelves, assembling furniture, drilling pilot holes: any of the three models will do. The Bosch is the lightest.
  • Building a deck or fence: the higher torque of the Ryobi or the two-battery DeWalt kit is a better match.
  • Drilling masonry or concrete: none of these is a hammer drill. Use a hammer drill kit from the same maker if you need that.
  • Metal drilling: use low speed, a sharp bit and cutting oil as the bit maker advises.

For a first or replacement home drill under $150, the DeWalt DCD771C2 kit suits buyers who want two batteries and a charger in one box, the Ryobi 18V ONE+ HP Compact Brushless drill/driver suits anyone who may add more ONE+ tools later, and the Bosch GSR12V-300B22 suits people who want the lightest tool for cabinets, shelving and overhead work. All three are kits that list a battery and charger, which matters because many cordless drills at this price are sold as bare tools. Stock varies by seller and some kits are being phased out, so confirm that the exact kit is still sold before you commit. The best choice depends on the platform you want to build on and how much you drill into hard materials.

This guide compares those three using the specifications the makers publish, then covers the features that decide real-world fit: torque, chuck size, clutch settings, battery platform, weight and what is in the box.

Cordless drills at a glance

Model Key stated specs In the kit Best for Limits
DeWalt 20V MAX DCD771C2 300 unit watts out, two speeds (0-450 and 0-1,500 RPM), 1/2 in single-sleeve ratcheting chuck Two compact batteries, charger, contractor bag General home and DIY drilling and driving Lower stated top speed than some rivals
Ryobi ONE+ HP Compact Brushless PSBDD02K 450 in-lbs, up to 1,700 RPM, 1/2 in chuck, 24-position clutch, 6.1 in long, brushless motor 2.0 Ah battery, charger Building a tool collection on one battery platform One battery in the standard kit
Bosch GSR12V-300B22 300 in-lbs, 0-460 / 0-1,750 RPM, 3/8 in chuck, 20+1 clutch, 1.6 lb tool only, 6.0 in head length Two 2.0 Ah 12V batteries, charger, bits, belt clip, bag Light, compact work in tight spaces 3/8 in chuck limits bit size

DeWalt 20V MAX DCD771C2

DeWalt lists the DCD771C2 kit as a compact drill driver on the 20V MAX platform. The maker gives 300 unit watts out, a two-speed gearbox (0-450 and 0-1,500 RPM) and a 1/2 inch single-sleeve ratcheting chuck. The kit comes with two compact lithium-ion batteries, a compact charger and a contractor bag, plus a limited warranty. DeWalt stresses the compact, lightweight design and ergonomic handle for confined spaces.

The kit contents are the main appeal: two batteries mean you can keep working while one charges, which suits people who tackle decks, fences and furniture builds in a single weekend. The 20V MAX platform is also large, so adding other tools later is straightforward.

Ryobi 18V ONE+ HP Compact Brushless (PSBDD02K)

Ryobi lists this kit with a brushless motor, up to 1,700 RPM from a two-speed gearbox (0-450 and 0-1,700 RPM) and 450 in-lbs of torque. It has a 1/2 inch chuck, a 24-position clutch and a length of 6.1 inches, and the maker describes it as lightweight and suited to overhead work and confined areas. The standard kit contains the drill/driver, a 2.0 Ah battery and a charger. Ryobi notes that the ONE+ system is compatible with more than 300 tools developed over 30 years, and other configurations exist, including a tool-only version, a limited edition and a two-battery option.

The torque figure is higher than the other two models in this guide, and the 24-position clutch gives finer control when driving screws. The cost of entry depends on the configuration. A single-battery kit is a good value for light jobs, but if you expect long sessions, consider the two-battery version.

Bosch GSR12V-300B22

Bosch lists this 12V Max drill/driver with 300 in-lbs of torque, a variable two-speed transmission (0-460 and 0-1,750 RPM), a three-jaw keyless 3/8 inch chuck, a 20+1 clutch and a head length of 6.0 inches. It weighs 1.6 pounds without the battery. The kit includes the drill, two 12V 2.0 Ah lithium-ion batteries, a charger, four Impact Tough bits, a bit holder, a belt clip and a carrying bag. The 12V class is built around lighter, smaller tools, which helps when you work overhead or in cabinets. Some retailers have marked this kit as discontinued, so a newer Bosch 12V kit may be the one on shelves.

The 3/8 inch chuck handles most household bits, but it will not accept larger shanks. Heavy drilling with big spade bits or hole saws is better suited to an 18V or 20V tool with a 1/2 inch chuck.

What to look for

Torque and speed

Torque in inch-pounds or unit watts out shows how well the drill drives large fasteners or powers through dense wood. Compare like with like: the DeWalt uses unit watts out, while Ryobi and Bosch quote inch-pounds. Two-speed gearboxes let you pick low speed with high torque for screws and high speed for drilling holes.

Chuck size

A 1/2 inch chuck accepts larger bits and tends to grip better. A 3/8 inch chuck is lighter and fine for common household work. If you plan to use auger bits, paddle bits or hole saws, a 1/2 inch chuck is the safer choice.

Clutch settings

The clutch stops the drive at a set torque. A fine range of positions, such as the Ryobi 24 positions or the Bosch 20+1, helps you set the screw depth in soft materials. A drill with fewer steps can still work if you use a light touch.

Brushless or brushed

Brushless motors are generally more efficient and can run longer per charge, and Ryobi and Bosch list brushless motors for the models above. A brushed motor can still be a good value for casual use, but the maker pages are the place to confirm the motor type of any kit.

Battery platform

The battery you buy now will power future tools. 20V MAX, 18V ONE+ and 12V Max are each broad systems, so look at which tools you may want later: a circular saw, impact driver, vacuum or outdoor equipment. Check the maker’s range for tools you are likely to buy.

Weight and size

The Bosch is lightest at 1.6 pounds without the battery, and the other two are compact designs too. A lighter tool reduces fatigue, but a larger battery adds weight and runtime.

Match the drill to the job

  • Hanging shelves, assembling furniture, drilling pilot holes: any of the three models will do. The Bosch is the lightest.
  • Building a deck or fence: the higher torque of the Ryobi or the two-battery DeWalt kit is a better match.
  • Drilling masonry or concrete: none of these is a hammer drill. Use a hammer drill kit from the same maker if you need that.
  • Metal drilling: use low speed, a sharp bit and cutting oil as the bit maker advises.

Pick X if you…

If you… Pick Why
Want two batteries in the box DeWalt DCD771C2 Kit includes two batteries, charger and bag
Want to expand with many tools Ryobi ONE+ HP Compact Brushless ONE+ system with 300+ compatible tools, 450 in-lbs
Mostly work overhead or in cabinets Bosch GSR12V-300B22 1.6 lb tool-only weight, compact head
Need a 1/2 inch chuck for larger bits DeWalt or Ryobi Both list 1/2 inch chucks

Alternatives to consider

  • Milwaukee, Makita, Ridgid and Craftsman: each has current compact drills and combo kits. Compare kit contents and the battery platform.
  • Drill and impact driver combo: a better choice if you drive a lot of long screws.
  • Corded drill: suits workshop use and does not depend on batteries.

Safety and care

  • Wear eye protection and clamp the workpiece when practical.
  • Check for hidden wiring and pipes before drilling into walls, and hire a licensed professional if you are unsure.
  • Use the charger supplied for your battery and stop using batteries that are damaged or swollen.
  • Remove the battery before changing bits when working with chuck keys or in awkward positions.
  • Store batteries at moderate temperatures and keep the vents clear of dust.

Frequently Asked Questions

Is a 12V drill powerful enough for home use?

For most household tasks, yes. Bosch lists 300 in-lbs of torque for the GSR12V-300B22, enough for shelves, furniture and many deck screws. For large hole saws or long lag screws, an 18V or 20V tool is better.

Do these kits include a charger?

Yes, the DeWalt, Ryobi and Bosch kits described here list a battery or batteries and a charger. Tool-only versions of many drills do not, so confirm the kit contents before buying.

What is a unit watts out rating?

It is DeWalt’s measure of power delivered by the tool, used instead of inch-pounds. It is not directly comparable to a torque number, so compare drills by their stated features and by user needs rather than by converting between figures.

Do I need a hammer drill?

Only for masonry or concrete. A standard drill driver is fine for wood, metal and drywall. If you need to drill masonry, look for a hammer drill model from the same maker.

How many batteries do I need?

One may be enough for light tasks, but two lets you keep working while the other charges. The DeWalt and Bosch kits include two batteries, and Ryobi offers a two-battery configuration.

Which battery platform should I choose?

Pick the system with the tools you are most likely to add later, such as a circular saw, sander or outdoor equipment. Look at each maker’s lineup and the warranty terms, which differ by maker and kit.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Cordless Drill under $150: Picks and What…Check price on Amazon