Key takeaways
- Have a licensed plumber install tempering valves in line with local code and the manual.
- Never replace an emergency-equipment valve with a bathing valve, or the reverse.
- Do not adjust a locked temperature setting except as the maker’s instructions state and qualified staff direct.
- Emergency showers and eyewashes require regular activation and inspection under workplace rules; follow the maker’s maintenance instructions.
- If someone is burned or chemically exposed, flush with water and seek medical care.
- If a valve stops mixing correctly, do not defeat it or remove its safety features. Service or replace it.
A “safety shower tempering valve” is, strictly, a professional product: a thermostatic valve built to the ASSE 1071 standard that supplies tepid water to emergency drench showers and eyewash stations in workplaces and labs, and it is normally specified, installed and maintained by a plumber or safety professional, not bought by a homeowner. If you are a home buyer looking for scald protection on an ordinary bathroom shower, you want a different product, a general-purpose anti-scald mixing valve listed to ASSE 1016 or 1070, and this guide explains both so you do not buy the wrong one.
Two different products behind one keyword
Emergency equipment tempering valves (ASSE 1071)
Emergency showers and eyewashes must deliver tepid water so that a person can stay under it for the recommended flushing time. Watts sells valves for this under its Powers brand, called HydroGuard XP, listed to ASSE 1071, the standard for temperature-actuated mixing valves for plumbed emergency equipment. The maker lists the ETV200, ETV400 and ETV500 for drench showers and eyewashes and the ES150 for eye and face wash. Features the maker lists include an internal bypass that keeps cold water flowing if the valve fails or hot water is lost, a vandal-resistant lock on the temperature setting, and rotatable union triple-duty checkstops. The ES150 supply fixture is factory set to 85 degrees Fahrenheit (29 degrees Celsius), with a stated adjustment range of 60 to 95 degrees Fahrenheit and a lockable means of securing the temperature. The maker lists the valves to ASSE 1071, and the ETV models also to IAPMO UPC. Leonard Valve also makes emergency mixing valves, which its literature describes as locked at 85 degrees Fahrenheit with an internal cold-water bypass.
These are not retail plumbing items. They are selected for the flow the fixture needs, sized for the installation and tested on a schedule by trained staff under workplace rules such as ANSI Z358.1. A homeowner who has an emergency eyewash for a workshop, hobby lab or pool chemical room should have a plumber or safety adviser select and install the valve.
Anti-scald valves for bathing (ASSE 1016 / 1070)
For a typical bathroom, the relevant listing is different. Watts says its general-purpose tempering valves, including the MMV, L111 and USG families, are listed to ASSE 1016 or 1070; listings vary by model, so confirm the standard on the exact valve. These are for bathing and washing fixtures and are not emergency-equipment valves. The maker notes they should never be set above 120 degrees Fahrenheit (49 degrees Celsius). A water heater’s own thermostat and a pressure-balancing or thermostatic shower valve in the wall also provide scald protection, and your local code may require specific types in new work.
What the ASSE 1071 standard requires
From a summary published by Leonard Valve, the standard covers eyewash, eye and face wash, drench showers and combination units installed in systems that follow ANSI Z358.1. If hot water fails, cold water must keep flowing at the manufacturer’s stated bypass rate at a 30 psi differential. If cold water fails, hot water flow must not exceed the limits in the standard’s table. Outlet temperature under normal operation must not exceed 100 degrees Fahrenheit, and makers set their valves lower, commonly around 85 degrees; the related ANSI Z358.1 describes tepid flushing water as roughly 60 to 100 degrees Fahrenheit. These are the reasons the valves look and cost more than ordinary mixing valves, and why you should not substitute a bathing valve in emergency equipment.
At a glance
| Product type | Listing | Intended use | Key stated points | Who installs it |
|---|---|---|---|---|
| Watts / Powers HydroGuard XP ETV200, ETV400, ETV500 | ASSE 1071, IAPMO UPC | Drench showers and eyewashes | Bypass keeps cold flowing on hot-water loss; lockable temperature setting | Plumber or safety professional |
| Watts / Powers HydroGuard XP ES150 | ASSE 1071 | Eye and face wash | Factory set to 85 F; lockable | Plumber or safety professional |
| Leonard Valve emergency mixing valves | Per maker | Emergency fixtures | Locked 85 F setting and internal cold-water bypass per the maker’s literature | Plumber or safety professional |
| Watts MMV, L111, USG tempering valves | ASSE 1016 or 1070 | Bathing and washing fixtures | Do not set above 120 F, per the maker | Plumber, depending on local code |
How to choose for a home bathroom
The best approach is usually layered. Set the water heater thermostat to the temperature in the heater maker’s manual and local guidance, and consider a pressure-balancing or thermostatic shower valve behind the wall. Where hot water is stored hotter for sanitation, a point-of-use tempering valve near the heater or a thermostatic mixing valve at the fixture lowers the temperature before it reaches people. Homes with children, older adults, or anyone with reduced sensation should take this seriously. A thermostatic valve cannot make scalding impossible. It reduces the risk when installed and maintained to the manufacturer’s instructions, and it can fail if scale or sediment builds up, so scheduled service matters.
Compatibility checks include pipe size, the flow your fixtures need, minimum flow needed for the valve to regulate, supply pressure balance between hot and cold, and the temperature range the valve can mix. Hard water can foul the thermostatic element. Some valves need a minimum flow, so a low-flow showerhead may cause temperature swings. Make sure the valve is listed for potable water and for your jurisdiction.
Budget, mid-range and premium
For bathing valves, budget means simple, fixed-range thermostatic cartridges on the shower valve itself. Mid-range includes a stand-alone thermostatic mixing valve with check stops. Premium includes valves with certifications for institutional use, integral check valves and serviceable cartridges. Emergency-equipment valves such as the ASSE 1071 models sit in a separate professional category, and the cost question matters less than correct specification and the required periodic inspection.
Installation and safety
- Have a licensed plumber install tempering valves in line with local code and the manual.
- Never replace an emergency-equipment valve with a bathing valve, or the reverse.
- Do not adjust a locked temperature setting except as the maker’s instructions state and qualified staff direct.
- Emergency showers and eyewashes require regular activation and inspection under workplace rules; follow the maker’s maintenance instructions.
- If someone is burned or chemically exposed, flush with water and seek medical care.
- If a valve stops mixing correctly, do not defeat it or remove its safety features. Service or replace it.
Pick X if
| If your situation is | Pick |
|---|---|
| Workplace or lab drench shower or eyewash | An ASSE 1071 valve such as Watts / Powers HydroGuard XP, specified by a professional |
| Eye and face wash station only | ES150 class valve, per the maker’s selection guide |
| Home bathroom scald protection | ASSE 1016 or 1070 tempering or thermostatic valve |
| Whole-house hot water control | A mixing valve at the water heater, installed by a plumber |
Alternatives
A pressure-balancing shower valve is the standard choice in many homes and prevents sudden temperature swings when a toilet flushes. A thermostatic shower valve holds a set temperature more precisely. Lowering the water heater thermostat reduces scald risk at all taps. A portable plumbed-free eyewash bottle is not a substitute for a plumbed station where workplace rules require one.
Questions to ask before buying any tempering valve
Whichever type you are considering, a short checklist avoids mistakes. First, which standard is the valve listed to, and does it match the fixture: ASSE 1071 for plumbed emergency equipment, ASSE 1016 or 1070 for bathing and washing. Second, what flow does the fixture need, because a valve must be sized for it and some require a minimum flow to regulate. Third, what are the hot and cold supply pressures and temperatures, and are they balanced. Fourth, is there a bypass or fail-safe behavior, and what does the maker say it does when one supply fails. Fifth, who will service it, how often and with what parts. Finally, does your local code or workplace rule require a particular listing or inspection record. A plumber or safety professional can answer these quickly and put the answers in writing.
Frequently Asked Questions
What is a safety shower tempering valve?
It is a thermostatic mixing valve built to ASSE 1071 that supplies tepid water to emergency drench showers and eyewash stations. The maker lists models such as the HydroGuard XP ETV200 and ES150.
Can I use one in my home bathroom?
It is not intended for ordinary bathing. For a bathroom, use a valve listed to ASSE 1016 or 1070, and have a plumber install it where code requires.
What temperature should it deliver?
The ASSE 1071 outlet limit is 100 degrees Fahrenheit under normal operation, and makers set lower. The ES150 is factory set to 85 degrees Fahrenheit with a stated adjustment range of 60 to 95.
What happens if hot water fails?
Under the standard, cold water must keep flowing at the maker’s stated bypass rate, so a person still has water to flush with. The Watts valves list an internal bypass for this.
What is the maximum setting for a general tempering valve?
Watts states that its bathing tempering valves should never be set above 120 degrees Fahrenheit. Follow the manual and local code.
Do these valves need maintenance?
Yes. Thermostatic elements can foul with scale, and emergency equipment needs scheduled inspection under workplace rules. Follow the maker’s instructions and use a qualified technician.
You might also like